Home Depot Plexiglass Cleaner Modern Home Plans

Use a cleaning cloth made of a soft material, such as cotton or microfiber. If you have a deep scratch on your plexiglass, then start with 600-grit sandpaper instead. Hold the heat gun 2–3 in (5.1–7.6 cm) from the plexiglass and turn it on. Position the plexiglass so you can easily reach the scratch with your heat gun. Keep the heat gun's nozzle at least 2 inches (5.1 cm) from the plexiglass so you don't accidentally cause it to melt or bubble. When you're ready to start, press the power button to start the machine.

plexiglass scratch remover home depot

Wipe the scratch remover off the plexiglass with a dry cloth. As soon you're done applying the scratch remover to the plexiglass, use a lint-free cleaning cloth to wipe any excess off. Once the scratch remover is off of your piece, you won't be able to see the scratches anymore. The area with the scratches will look cloudy when you're finished buffing it with the sandpaper. Apply a coin-sized amount of plexiglass polish onto a clean cloth and work it into the glass in small circular motions. Keep buffing the polish for 30 seconds or until it turns clear on your surface.

Home Depot Plexiglass Cleaner

Wipe the polish off with a clean, dry cloth to remove the scratches. Acrylic scratch removers, such as Novus or Turtle Wax, help polish your plexiglass and buff out any light scratches on its surface. Squeeze a dime-sized amount onto the damp cloth, and rub it into the cloth to spread it.

plexiglass scratch remover home depot

Alternate between a dry and wet piece of sandpaper for the next 2 minutes. Switch to a dry piece of 800-grit sandpaper and go over the same areas. Keep working in small circles so the scratch is buffed completely. Change the sandpaper you're using every 30 seconds for the next 2 minutes. Apply light pressure to the scratches with your wet piece of sandpaper. Work in small, circular movements to buff the surface evenly.

How to Remove Plexiglass Scratches

Buff the remover into the scratch for 30 seconds with your cloth. Move the cloth in small, circular motions to work the scratch remover into the scratch. Evenly coat the scratch as much as you can to fill and blend it in with the rest of the plexiglass. Keep buffing the remover for at least 30 seconds or until it turns clear.

plexiglass scratch remover home depot

Sand any areas that are scratched for 1 minute, and wet the sandpaper again when it feels dry. Plexiglass is delicate and very easy to scratch, so you want to remove any particles from the surface first. Use a dry dust microfiber cloth to dust the surface very softly. Then, fold your glass microfiber cloth in 4 and spray glass cleaner directly to the surface. Wipe it down and then remove any marks or streaks with the dry side of your cloth. Keep the heat gun moving over the scratch while you use it so you don't cause the plexiglass to melt or bubble.

Polishing with a Commercial Scratch Remover

Your piece of plexiglass may start to look cloudy or frosted over, but it will not stay that way when you finish. Plexiglass polish may also be called acrylic polish in stores.

Use small back and forth strokes over the entire scratch until it starts to disappear. Try adjusting the angle of the heat gun to hit the scratch from all sides. After about seconds of heating, light scratches will start to go away. Hold your plexiglass up to a light to see if there are any visible scratches. If there still is, then buff on another coat of scratch remover.

Unlock expert answers by supporting wikiHow

If you have multiple scratches you need to remove, use a quarter-sized amount instead. Once you've worked with 800-grit sandpaper, switch to 1200-grit, which will help smooth your plexiglass even more. Start with a wet piece of sandpaper for 30 seconds and then switch to a dry piece. Keep alternating between wet and dry sandpaper for 3 minutes to buff the plexiglass. This article was co-authored by Claudia & Angelo Zimmermann and by wikiHow staff writer, Hunter Rising. They are also the founders of Clean Code, a DIY 100% natural cleaning product line.

plexiglass scratch remover home depot

You may also apply the scratch remover directly on the plexiglass if you want. Run a piece of 800-grit sandpaper underneath warm water to get it damp. Shake any excess water off of the piece and wring it out so it doesn't drip. Set up your work station near a sink if possible so you can re-wet the sandpaper whenever you need to. Don't use a cloth that has an abrasive side since it will only add more scratches to your plexiglass. Many heat guns will automatically start on the lowest heat setting when they're turned on.

Comments

Popular posts from this blog

John Wayne Gacy: A Timeline of the 'Killer Clown' Murders, Trial and Execution

Review: Hurtigruten Expeditions in the Galapagos Islands

The Navajo And Their Beards: A Culture Rich In Tradition